Pre-wall installation system for dry build up (self-supporting)
A116/1200 Solomodul
Product details
| Water connection from the back or top via mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 0,8 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 6 – 9 l |
| Small flush | 2,5 – 3,5 l |
| Factory setting of large flush | 6 l |
| Factory setting of small flush | 3 l |
| Hygienic reserve | 3 l |
| Water volume in the cistern | 9 l |
| Load test | 400 kg |
- For wall-hung WC
- For open spaces – does not need any supporting structure
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Application
- A frame module for building into plasterboard constructions
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all ALCA flush plates
- The cistern is made of one piece, thus ensuring 100% impermeability
- Water supply from the rear/top
- Maintenance work without using any tools
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Installation depth adjustable from 20–95 mm
- Installation depth 200 mm
- Adjustable telescopic feet, range 0–150 mm
- Frame material: powder-coated metal
Specifications
Norms
EN 14124, EN 14055
- 39229000
| Quantity (package) | 1 pc |
| Quantity (pallet) | 10 pcs |
| Dimensions (piece) | 1195×220×525 mm |
| Dimensions (package) | – mm |
| Weight (piece) | 20,975 kg |
| Weight (package) | 20,975 kg |
| Weight (pallet) | 229,75 kg |
- Cistern with fill and flush valve
- Self-supporting frame
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 8 pcs, dowel Ø12 – 8 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/110 polyethylene, PE-HD
- Fixation material for fixing the bidet: Threaded rod M12 – 4 pcs, washers – 2 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- Service opening cover is simply adjustable, screws 4 pcs
Scope of supply
| M0005-ND | Water supply ring A100 |
| M0017C-ND | Inlet fill valve bracket (range AM) |
| M0021-ND | Inlet sealing (WC modules) |
| M0023-ND | Wrapping seal 45×58×25 (WC modules) |
| M0026-ND | Waste sealing (WC modules) |
| M0028-ND | Coupler sealing |
| M0029-ND | Waste pipe holder |
| M0039-ND | Sleeve |
| M0043B-ND | Inner board |
| M0080-ND | Sleeve lid |
| M0243-ND | Nut for angle valve bracket |
| M903-ND | Threaded rods + accessories |
| M905-ND | Complete mechanism |
| MN0091-ND | Frame sleeve |
| MN0092-ND | Frame for WC module sleeve (range A) |
| MN0115-ND | Pipe with O-ring for module range AM |
| P165-ND | Angle valve SCHELL with bracket and nut |
| S0032-ND | Screw into metal 4.2×16 DIN 7983 A2 |
Downloads
| Product code | EAN | Technical sheet |
|---|
| File Name | Size | Action |
A116/1200 Solomodul - CAD drawing.dwg |
395.83 kB |
Download
|
|
A116/1200 Solomodul - CAD drawing.dxf |
1.14 MB |
Download
|
|
A116/1200 Solomodul - Installation instructions.pdf |
1.25 MB |
Download
|
|
A116/1200 Solomodul - Certificate.pdf |
1.12 MB |
Download
|
|
A116/1200 Solomodul - Declaration of performance.pdf |
161.77 kB |
Download
|