Pre-wall installation system with ventilation for dry build up (especially for renovation of concrete panel housing units)
A102/1200V Jádromodul
Product details
Water connection from the back or top via mounting holes | G1/2 " |
Functional range of water pressure | 0,05 – 0,8 MPa |
Recommended range of water pressure | 0,3 – 0,5 MPa |
Big flush | 6 – 9 l |
Small flush | 2,5 – 3,5 l |
Factory setting of large flush | 6 l |
Factory setting of small flush | 3 l |
Hygienic reserve | 3 l |
Water volume in the cistern | 9 l |
Load test | 400 kg |
- For wall-hung WC
- For the reconstruction of apartment units
- For installation between two walls
- For installation into wooden structures
- Preparation for the connection to the ventilation system
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Application
- Odour removal directly from the WC bowl
- Can be connected to a extraction fan (not included)
- Recommended extraction fan flow rate 30m³/h, pressure 60 Pa and a return valve, the fan must be positioned at least at a height of 1.2 m above the floor
- The load is transferred to the side walls, the strut is adjustable in the range 830–1200 mm
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- The elbow bend comes fitted with an end-plug
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all ALCA flush plates
- The cistern is made of one piece, thus ensuring 100% impermeability
- Water supply from the rear/top
- Maintenance work without using any tools
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Installation depth adjustable from 20–95 mm
- Mounting depth 125 mm, with waste elbow 160 mm
- Adjustable telescopic feet, range 0–200 mm
- Frame material: powder-coated metal
Specifications
Norms
EN 14124, EN 14055
- 39229000
Quantity (package) | 1 pc |
Quantity (pallet) | 15 pcs |
Dimensions (piece) | 1195×530×145 mm |
Dimensions (package) | – mm |
Weight (piece) | 16,5454 kg |
Weight (package) | 16,5454 kg |
Weight (pallet) | 268,181 kg |
- Cistern with fill and flush valve
- Self–supporting frame with a crossbeam for anchoring between walls 830–1200 mm
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- Service opening cover is simply adjustable, screws 4 pcs
- Elbow HT for connection to the ventilation system
- Plug for plugging the exhaust outlet if not used
Scope of supply
M0017C-ND | Inlet fill valve bracket (range AM) |
M0029-ND | Waste pipe holder |
M0039-ND | Sleeve |
M1670-ND | HT elbow 40/15 |
Downloads
Product code | EAN | Technical sheet |
---|
File Name | Size | Action |
A102/1200V Jádromodul - Installation instructions.pdf | 1.29 MB | Download |
A102/1200V Jádromodul - CAD drawing.dwg | 266.41 kB | Download |
A102/1200V Jádromodul - CAD drawing.dxf | 864.36 kB | Download |
A102/1200V Jádromodul - Certificate.pdf | 1.12 MB | Download |
A102/1200V Jádromodul - Declaration of performance.pdf | 161.77 kB | Download |