Shower drain with an edge for perforated grids

APZ1SMART-LINE

Technical parameters

Odour trap50 mm
Flow rate60 l/min
Resistance of odour trap against the pressure982 Pa
Waste pipe diameter50 mm
Minimum thickness of concrete85 mm
Total installation height100 – 158 mm
Load class K3300 kg

    Application

  • For indoor use
  • For drainage of floor-level showers
  • For installation into open spaces or near the wall of the shower area
  • For perforated stainless steel grids
  • For wheelchair access

    Specifications

  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Installation height from 85 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • Combined odour trap SMART
  • 25 years guarantee
  • Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
  • Trap material: polypropylene
  • Norms

    EN 1253
Quantity (package) 24 pcs
Quantity (pallet) 48 pcs
Dimensions (piece) 620×100×160 mm
Dimensions (package) 1175×668×410 mm
Weight (piece) 2,9564 kg
Weight (package) 70,9536 kg
Weight (pallet) 161,9072 kg

    Scope of supply

  • Drain assembled with trap and combined odour trap
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap
  • Protective film for trap inlet
  • Installation trough cover - polystyrene
  • Grid LINE-M
Product codeEANTechnical sheet
APZ1SMART-LINE-5508595580567958Technický list
APZ1SMART-LINE-6508595580567217Technický list
APZ1SMART-LINE-7508595580566623Technický list