Alcaplast
Tisk Export do PDF

Shower Drains

Alca linear shower drains offer an ideal solution for your shower enclosure. By installing a linear shower drain into your shower cubicle you will achieve harmonious layout with an emphasis on space, height and an obstacle free transition from wet to dry bathroom areas. Drain and grid are made from top quality stainless steel material according to the DIN 1.4301 (ČSN 17240-Czech Institute for Standardization). It is also possible to supply steel according to the DIN 1.4401 (ČSN 17346), which is more suitable for swimming pool areas with chlorine enriched water.

 
LOW
INSTALLATION
HEIGHT		   Low installation height:
55 mm for drains with an outlet pipe diameter of 40 mm (suitable for renovations).
85 mm for drains with an outlet pipe diameter of 50 mm (suitable for new buildings).
   
25 YEAR
WARRANTY		   Material used:
Stainless Steel DIN 1.4301 (ČSN 17240).
Treatments of materials employed:
Pickling and passivation, electrochemical polishing.
Protection against dirt during installation:
The collar and trap are protected by foil, and the channel itself by a styrofoam insert.
   
   
HIGH FLOWRATE
(60 l/min.)		   Maximum water flow:
60 l/min. for drains with an outlet pipe diameter of 50 mm.
35 l/min. for drains with an outlet pipe diameter of 40 mm.
Two traps in one: the high flowrate achieved is due to the double compartment trap system.
Czech standard: ČSN EN 1253
   
   
COMPLETELY CLEANABLE TRAP   Material used: polypropylene
Construction:
Two outlet compartments, two removable inlet parts and two protective grid traps.
Cleanability:
The protective grid trap will catch most of the dirt, but by removing it and the inlet part you can clean the drain all the way to the waste pipe!
   
   
HARMONY
OF COLOURS		  
   
COMPLETE PACKAGE INCLUDING ALL ACCESSORIES   Complete package including all accessories:
  • shower drain pre-assembled with a trap
  • installation set (bolts, plugs)
  • water-proofing tape
  • protective foil covering for the collar and inlet pipe, and protective insert for drainage channel
   
   
TAILORED TO FIT SOLUTIONS WITHIN 30 DAYS   Range of lengths: 300–2,200 mm for a single section. Lengths greater than 2,200 mm can be achieved by connecting sections as required.
Different edge heights and depths of the drainage channel can be supplied on request.
Traps: Can be positioned wherever the customer wishes and, depending
on the water flow, more than one trap can be used in a single drain.
Materials: The standard grade of stainless steel employed is DIN 1.4301 (ČSN 17240). For aggressive environments (e.g. pools), it is stainless steel DIN 1.4404 (ČSN 17349).
   
   
ALCA drain
MINI		   ALCA drain MINI
Length: 300 mm
Application: Universal use as a floor or shower drain.
Advantage: High flowrate of 40 l/min.