.png)
ARZ1
Corner shower drain without an edge for perforated grids
Application
For indoor use
For drainage of floor-level showers
For installation in the corner of the shower enclosure
For massive perforated stainless steel grids
For wheelchair access
Advantages:
High flow rate (up to 68 l / min)
100% easy clean trap
Low height installation
Complete technical and design solutions
Complete package including all accessories
25 year guarantee
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| ARZ1 | 8595580500238 |  |
Downloads
Norms
EN 1253Technical parameters
Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum concrete thickness
100 mm
Total installation height
110 – 170 mm
Load class K3
300 kg
Specifications
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
(BUILDING HEIGHT 100 MM)
The vertical flange allows for simple installation and perfect wall isolation
Adjustable height
Mechanically cleanable trap up to the waste pipe
The trap is firmly connected to the drain channel - 100% waterproofing
Self-adhesive waterproofing tape for quality waterproofing
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Better and safer transition of the insulation from the floor to the wall
Possibility to buy a combined odour trap
25 years guarantee
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Trap material: polypropylene
Logistic information
Quantity – packing
4 pcs
Quantity – Palett
– pcs
Dimensions – piece
490×125×330 mm
Dimensions – packing
595×395×435 mm
Weight
3,1764 kg
Weight – packing
12,4064 kg
Weight– Palett
– kg
Scope of supply
The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 - 2 pcs, dowel Ø10 - 2 pcs, screw Ø4,2×38 - 4 pcs, dowel Ø8 - 4 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Hardware for anchoring the adjustable legs: screw M6x12× - 3 pcs
