APZ1

Shower drain with an edge for perforated grids

Application

Barrier free access
For drainage of floor level showers
It can therefore be placed in open spaces or near the wall of the shower area.
For perforated stainless steel grids
For indoor use
pdf Detail

This drain is designed to take perforated grids. The stainless steel edge makes an elegant border between the tiles and the grid. Water flows into the drain both at the edges and through the perforations in the grid. It can therefore be positioned on the floor or near the wall of the shower area.

Norms

EN 1253

Technical parameters

Total installation height
100 – 158 mm
Minimum thickness of concrete
85 mm
Resistance of odour trap against pressure
982 Pa
Outlet pipe diameter (D)
50 mm
Flowrate
60 – 68,8 l/min
Load class – K3
300 kg
Odour trap
50 mm

Specifications

The collar and trap are protected by foil, and the channel itself by a polystyrene insert.
Trap material: Polypropylene
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Completely cleanable trap up to the waste pipe
Option to buy a combined odour trap
Linear drains from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Self-adhesive tape for quality waterproofing
The trap is firmly connected to the drain channel - 100% waterproofing
Installation height from 85 mm
Adjustable height
The high flowrate achieved is due to the double compartment trap system.
25 years warranty

Related Products