APZ1016 Wall

Shower drain with an edge for full grids and fixed vertical flange to the wall, straight outlet

Application

For indoor use
For drainage of floor-level showers
For installation directly to the wall
For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
For wheelchair access
Product codeEANTechnical
sheet
APZ1016-3008595580553173---
APZ1016-5508595580553180---
APZ1016-6508595580553197---
APZ1016-7508595580553203---
APZ1016-8508595580553210---
APZ1016-9508595580553227---
APZ1016-10508595580553234---
APZ1016-11508595580553241---

Norms

EN 1253

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
95 mm
Total installation height
110 – 168 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids - stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Installation height from 95 mm
Adjustable height
The trap is firmly connected to the drain channel - 100% waterproofing
Self-adhesive waterproofing tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years warranty
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Trap material: polypropylene

Related Products