APZ1106 Professional Low

Shower drain with an edge for full grids, straight outlet

Application

For wheelchair access
For wooden and prefabricated buildings
For sites with limited floor height
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area.
For indoor use

Norms

EN 1253

Technical parameters

Total installation height
80 – 106 mm
Minimum thickness of concrete
65 mm
Resistance of odour trap against the pressure
575 Pa
Waste pipe diameter
40 mm
Flow rate
32 l/min
Load class K3
300 kg
Odour trap
28 mm

Specifications

The collar and trap are protected by foil, and the channel itself by a polystyrene insert
Trap material: polypropylene
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Mechanically cleanable trap up to the waste pipe
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids - stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Self-adhesive tape for quality waterproofing
The trap is firmly connected to the drain body - 100% waterproofing
Installation height from 65 mm
Adjustable height
The high flow rate is achieved due to the double compartment trap system.
25 years warranty

Related Products