APZ1116 Wall Low

Shower drain with an edge for full grids and fixed vertical flange to the wall, straight outlet

Application

For indoor use
For drainage of floor-level showers
For installation close to the wall
For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
For wheelchair access
Product codeEANTechnical
sheet
APZ1116-3008595580553258Technický list
APZ1116-5508595580553265Technický list
APZ1116-6508595580553272Technický list
APZ1116-7508595580553289Technický list
APZ1116-8508595580553296Technický list
APZ1116-9508595580553302Technický list
APZ1116-10508595580553319Technický list
APZ1116-11508595580553326Technický list

Norms

EN 1253

Technical parameters

Odour trap
30 mm
Flow rate
40 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
40 mm
Minimum thickness of concrete
65 mm
Total installation height
80 – 110 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Installation height from 65 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene

Logistic information

Quantity – packing
8 pcs
Quantity – Palett
128 pcs
Dimensions – piece
385×185×160 mm
Dimensions – packing
590×430×390 mm
Weight
2,6460 kg
Weight – packing
21,168 kg
Weight– Palett
358,688 kg

Scope of supply

The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

Related Products