.png)
APZ16 Wall
Shower drain with an edge for full grids and fixed vertical flange to the wall
Application
For indoor use
For drainage of floor-level showers
For installation directly to the wall
For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
For wheelchair access
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| APZ16-300 | 8595580553012 |  | |
| APZ16-550 | 8595580553029 | | |
| APZ16-650 | 8595580553036 | | |
| APZ16-750 | 8595580553043 | | |
| APZ16-850 | 8595580553050 | | |
| APZ16-950 | 8595580553067 | | |
| APZ16-1050 | 8595580553074 | | |
| APZ16-1150 | 8595580553081 | |
Downloads
Norms
EN 1253Technical parameters
Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
95 mm
Total installation height
110 – 168 mm
Load class K3
300 kg
Specifications
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Installation height from 95 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene
Logistic information
Quantity – packing
8 pcs
Quantity – Palett
128 pcs
Dimensions – piece
385×185×160 mm
Dimensions – packing
590×430×390 mm
Weight
2,7662 kg
Weight – packing
22,1296 kg
Weight– Palett
374,0736 kg
Scope of supply
The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs
