APZ1BLACK

Shower drain with an edge for perforated grids, black-matt

news

Application

For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For perforated stainless steel grids
For wheelchair access
Product codeEANTechnical
sheet
APZ1BLACK-3008595580511869Technický list
APZ1BLACK-5508595580511883Technický list
APZ1BLACK-6508595580512002Technický list
APZ1BLACK-7508595580512293Technický list
APZ1BLACK-8508595580512507Technický list
APZ1BLACK-9508595580512798Technický list
APZ1BLACK-10508595580511807Technický list
APZ1BLACK-11508595580511814Technický list
APZ1BLACK-14508595580511821Technický list

Norms

EN 1253

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 85 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301, with black-matt finish
Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×130×175 mm
Dimensions – packing
mm
Weight
1,856 kg
Weight – packing
17,5932 kg
Weight– Palett
301,4912 kg

Scope of supply

The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

Related Products