APZ4 Flexible

Shower drain with an edge for perforated grids and adjustable vertical flange to the wall

Application

For indoor use
For drainage of floor-level showers
For installation directly to the wall
For perforated grids
For wheelchair access

Advantages:

High flow rate (up to 68 l / min)
100% easy clean trap
Low height installation
Complete technical and design solutions
Complete package including all accessories
25 year guarantee
Product codeEANTechnical
sheet
APZ4-5508594045939958Technický list
APZ4-6508594045939965Technický list
APZ4-7508594045939972Technický list
APZ4-8508594045939989Technický list
APZ4-9508594045939996Technický list
APZ4-10508595580500016Technický list
APZ4-11508595580500023Technický list

Norms

EN 1253

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Movable flange range
10 – 15 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Adjustable vertical insulating collar for tiles with a thickness of 6-12 mm
Installation height from 85 mm
Adjustable height
The trap is firmly connected to the drain channel - 100% waterproofing
Self-adhesive waterproofing tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Facilitates the inclination of the floor
Better and safer transition of the insulation from the floor to the wall
Possibility to buy a combined odour trap
25 years guarantee
Trap material: polypropylene

Logistic information

Quantity – packing
8 pcs
Quantity – Palett
24 pcs
Dimensions – piece
620×160×205 mm
Dimensions – packing
mm
Weight
3,4857 kg
Weight – packing
27,3088 kg
Weight– Palett
101,9264 kg

Scope of supply

The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 - 2 pcs, dowel Ø10 - 2 pcs, screw Ø4,2×38 - 3 pcs, dowel Ø8 - 3 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Anchoring set for fixing the adjustable legs: screw M6×12 - 2 pcs

Related Products