APZ5 SPA-EDEN

Waste system for installation in walls, cover stainless steel-polished

Application

For indoor use
Suitable for areas with movement of large number of people – swimming pools, spa, wellness center
For installation into the wall
For wheelchair access
Product codeEANTechnical
sheet
APZ5-EDEN-6508595580500030Technický list
APZ5-EDEN-7508595580500047Technický list
APZ5-EDEN-8508595580500054Technický list
APZ5-EDEN-9508595580500061Technický list
APZ5-EDEN-10508595580500078Technický list

Norms

EN 1253

Customs code

39229000

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Total installation height
165 – 220 mm
Minimum thickness of concrete
100 mm
Installation depth
64 mm
Cover width
60 mm

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation depth 64 mm
Water flows into the drain only between the edge of the floor tiles and the cover of the drain system
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
Easily removable cover – stainless steel polished
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to order with LED backlight
The system is placed outside the area of ​​mechanical stress
Possibility to buy a combined odour trap
25 years guarantee
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Trap material: polypropylene

Logistic information

Quantity – packing
8 pcs
Quantity – Palett
24 pcs
Dimensions – piece
820×160×205 mm
Dimensions – packing
825×375×830 mm
Weight
4,6272 kg
Weight – packing
38,8016 kg
Weight– Palett
136,4048 kg

Scope of supply

The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Stainless steel design grid EDEN polished
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

Related Products