APZ1011

Shower drain Antivandal with grid, straight outlet

Application

For indoor use
For wooden and prefabricated buildings
For public areas
For installation into open spaces or near the wall of the shower area
For drainage of floor-level showers
For wheelchair access
Product codeEANTechnical
sheet
APZ1011-300L8595580545406Technický list
APZ1011-300M8595580545413Technický list
APZ1011-550L8595580541019Technický list
APZ1011-550M8595580541026Technický list
APZ1011-650L8595580540999Technický list
APZ1011-650M8595580541002Technický list
APZ1011-750L8595580540975Technický list
APZ1011-750M8595580540982Technický list
APZ1011-850L8595580540951Technický list
APZ1011-850M8595580540968Technický list
APZ1011-950L8595580540937Technický list
APZ1011-950M8595580540944Technický list
APZ1011-1050L8595580540913Technický list
APZ1011-1050M8595580540920Technický list
APZ1011-1150L8595580540890Technický list
APZ1011-1150M8595580540906Technický list

Norms

EN 1253

Customs code

39229000

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Grid BUBLE is attached to the drain body using screws so that it can not be removed without special tools
Installation height from 85 mm
Adjustable height
The trap is firmly connected to the drain channel - 100% waterproofing
Self-adhesive waterproofing tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
Grid is included in packaging
25 years warranty
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Trap material: polypropylene