APZ1S

Shower drain with an edge for perforated grids

news

Application

For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For perforated stainless steel grids
For wheelchair access
Product codeEANTechnical
sheet
APZ1S-7508595580562236Technický list
APZ1S-8508595580562243Technický list
APZ1S-9508595580562250Technický list

Norms

EN 1253

Technical parameters

Odour trap
50 mm
Flow rate
60 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 85 mm
Adjustable height
The trap is firmly connected to the drain channel - 100% waterproofing
Self-adhesive waterproofing tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
Trap material: polypropylene

Logistic information

Quantity – packing
12 pcs
Quantity – Palett
36 pcs
Dimensions – piece
820×135×170 mm
Dimensions – packing
825×375×830 mm
Weight
3,4189 kg
Weight – packing
41,0268 kg
Weight– Palett
143,0804 kg

Scope of supply

The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 - 2 pcs, dowel Ø10 - 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Anchoring set for fixing the adjustable legs: screw M6×12 - 2 pcs

Related Products