APZ16 Wall

Shower drain with an edge for full grids and fixed vertical flange to the wall

Application

For indoor use
For drainage of floor-level showers
For installation directly to the wall
For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
For wheelchair access
Product codeEANTechnical
sheet
APZ16-3008595580553012Technický list
APZ16-5508595580553029Technický list
APZ16-6508595580553036Technický list
APZ16-7508595580553043Technický list
APZ16-8508595580553050Technický list
APZ16-9508595580553067Technický list
APZ16-10508595580553074Technický list
APZ16-11508595580553081Technický list

Norms

EN 1253

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
95 mm
Total installation height
110 – 168 mm
Load class K3
300 kg

Specifications

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Installation height from 95 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene

Logistic information

Quantity – packing
8 pcs
Quantity – Palett
128 pcs
Dimensions – piece
385×185×160 mm
Dimensions – packing
mm
Weight
2,7662 kg
Weight – packing
22,1296 kg
Weight– Palett
374,0736 kg

Scope of supply

The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

Related Products