APZ1116 Wall Low

Shower drain with an edge for full grids and fixed vertical flange to the wall, straight outlet


For indoor use
For drainage of floor-level showers
For installation close to the wall
For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
For wheelchair access
Product codeEANTechnical
APZ1116-3008595580553258Technický list
APZ1116-5508595580553265Technický list
APZ1116-6508595580553272Technický list
APZ1116-7508595580553289Technický list
APZ1116-8508595580553296Technický list
APZ1116-9508595580553302Technický list
APZ1116-10508595580553319Technický list
APZ1116-11508595580553326Technický list


EN 1253

Technical parameters

Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
95 mm
Total installation height
110 – 168 mm
Load class K3
300 kg


Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
For inserting full grids - stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
Installation height from 95 mm
Adjustable height
The trap is firmly connected to the drain channel - 100% waterproofing
Self-adhesive waterproofing tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Trap material: polypropylene

Related Products