Shower drain configurator
5
Online catalog

  • {{ result.text }}

  • {{ result.text }}

A115/1000E Renovmodul

Pre-wall installation system ECOLOGY for building into solid walls

ECOLOGY

Application

    Application

  • For wall-hung WC with flushing volume of 2/4 l
  • For walling in and around the bearing wall – wet process
  • Suitable for reconstruction
  • For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Norms

EN 14124, EN 14055

Customs code

39229000

Technical parameters

Technical parameters

Water connection from the back or top via mounting holesG1/2 "
Functional range of water pressure0,05 – 0,8 MPa
Recommended range of water pressure0,3 – 0,5 MPa
Big flush3,5 – 6 l
Small flush2 – 4 l
The default setting of large flush4 l
The default setting of small flush2 l
Hygienic reserve2 l
Water volume in the cistern9 l
Load test400 kg

Specifications

    Specifications

  • This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
  • Galvanized support structure with four hinged brackets for easy installation
  • The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • Removable piece of polystyrene allows for easy access during installation
  • Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
  • Dual flush independently adjustable with hygienic reserve
  • Water-saving flushING: 2 l small flush, 4 l large flush
  • Suitable for installation of remote or sensor flushing
  • Compatible with all ALCA flush plates
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • Water supply from the rear/top
  • Maintenance work without using any tools
  • The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
  • Mounting height 1062 mm
  • Installation depth adjustable from 20–95 mm
  • Installation depth 125 mm
  • Material of the load bearing structure: galvanized metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
20 pcs
Dimensions – piece
1050×140×480 mm
Dimensions – packing
1050×480×140 mm
Weight
9,824 kg
Weight – packing
10,0463 kg
Weight– Palett
220,8 kg

Scope of supply

  • Tank with inlet and Ecology outlet valve
  • Galvanized frame including supporting structure
  • Removable piece of polystyrene allows for easy access during installation
  • Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
  • Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Elbow waste connector HT 90/110 polyethylene, PE-HD
  • Inlet seal, PP outlet, wrapping seal
  • Drainage seal, PP connector, connector seal
  • End-caps set for protecting the connecting holes during installation of the system
  • Service opening cover is simply adjustable, screws 4 pcs
  • Production of this product was terminated