.png)
A108F/1100
Mounting frame with cistern for a waste sink with waste connection DN90/110 and faucet
Application
For mounting wall fittings
For a wall-hung waste sink with a spacing of anchor bolts up to 420 mm and waste connection Ø90/110
For mounting in front of a support wall or in to a plasterboard construction
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| A108F/1100 | 8595580542139 |  |
Downloads
Customs code
39229000Technical parameters
Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,6 MPa
Big flush
6 – 9 l
Small flush
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg
Specifications
For leading Wall Fittings
Built-in tanks allows for rinsing the waste sink
Height adjustable partitions
Swivel rail for attaching wall fittings with a pitch of 65-150 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition or in front of the bearing wall
The installed module is sealed with a plasterboard panel and there is no need for any additional fixing or anchor elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations
Dual flush, independently adjustable with hygienic reserve
Maintenance work without using any tools
Water supply from the rear / top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Adjustable telescopic feet, range 0 - 200 mm
Installation depth adjustable from 20-95 mm
Mounting depth 125 mm, with waste elbow 160 mm
Material: powder-coated metal
Logistic information
Quantity – packing
1 pcs
Quantity – Palett
15 pcs
Dimensions – piece
1195×145×530 mm
Dimensions – packing
1195×530×145 mm
Weight
15,8606 kg
Weight – packing
kg
Weight– Palett
253,688 kg
Scope of supply
Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2-3/8"
Flushing mechanism screw 2 pcs
Fixation set: screw Ø8×60 - 4 pcs, dowel Ø12 - 4 pcs
Connection fittings G3/4" - G1/2"
Fixation material for fixing the WC pan: Threaded rod M12 - 2 pcs, washers - 4 pcs , cover - 2 pcs, nut - 2 pcs, thread protector - 2 pcs
Waste Knee HT90 / 110 with a seal
Anchoring material: screw Ø8x60 - 4 pieces, dowel Ø12 - 4 pieces
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
The 2 piece cover of the service opening is simply adjustable
Red code - the price can be found here: Spare parts catalogue
Grey marked parts - products available on our website