Shower drain configurator
5
Online catalog

  • {{ result.text }}

  • {{ result.text }}

A101/1300H Sádromodul

Pre-wall installation system for dry build up (plasterboard) – for people with reduced mobility

Pro osoby se sníženou hybností

Application

    Application

  • For wall-hung WC
  • For mounting in front of a support wall or in to a plasterboard construction – for people with reduced mobility
  • For use with remote or sensor flushing
  • To mount supporting handrails
  • For floor thickness 0–200 mm
  • For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Product codeEANTechnical
sheet

Norms

EN 14124, EN 14055, EN ISO 10535, 732030

Customs code

39229000

Technical parameters

Technical parameters

Water connection from the back or top via mounting holesG1/2 "
Functional range of water pressure0,05 – 0,8 MPa
Recommended range of water pressure0,3 – 0,5 MPa
Big flush6 – 9 l
Small flush2,5 – 3,5 l
The default setting of large flush6 l
The default setting of small flush3 l
Hygienic reserve3 l
Water volume in the cistern9 l
Load test400 kg

Specifications

    Specifications

  • Frame for hanging wall-hung WC with boards for installation of handles for people with reduced mobility
  • The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
  • The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
  • The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
  • Dual flush, independently adjustable with hygienic reserve
  • Suitable for installation of remote or sensor flushing
  • Compatible with all ALCA flush plates
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • Water supply from the rear/top
  • Maintenance work without using any tools
  • The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
  • Installation depth adjustable from 20–95 mm
  • Mounting depth 125 mm, with waste elbow 160 mm
  • Mounting boards made of waterproof glued plywood
  • Adjustable telescopic feet, range 0–200 mm
  • Frame material: powder-coated metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
5 pcs
Dimensions – piece
1195×145×1060 mm
Dimensions – packing
1195×1060×145 mm
Weight
33,8334 kg
Weight – packing
32,9 kg
Weight– Palett
184,5 kg

Scope of supply

  • Cistern with fill and flush valve
  • Self-supporting frame
  • Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
  • Fixation set: screw Ø8×60 - 12 pcs, anchor Ø12 - 12 pcs
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Elbow waste connector HT 90/90 polyethylene, PE-HD
  • Waste reduction HT 90/110 polyethylene, PE-HD
  • Inlet seal, PP outlet, wrapping seal
  • Drainage seal, PP connector, connector seal
  • End-caps set for protecting the connecting holes during installation of the system
  • Service opening cover is simply adjustable, screws 4 pcs
  • Boards for installing handrails for the disabled – 2 pcs
  • Production of this product was terminated