A101/1200 Sádromodul

Pre-wall installation system for dry build up (plasterboard)

Product codeEANTechnical
sheet
A101/12008594045935851Technický list

Norms

EN 14124, EN 14055

Customs code

39229000

Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
6 – 9 l
Small flush
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg

Specifications

The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is sealed with a plasterboard panel and there is no need for any additional fixing or anchor elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear / top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Adjustable telescopic feet, range 0 - 200 mm
Mounting depth adjustable from 20–95 mm
Mounting depth 125 mm, with waste elbow 160 mm
Frame material: powder-coated metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
15 pcs
Dimensions – piece
1195×530×145 mm
Dimensions – packing
1195×145×530 mm
Weight
14,2054 kg
Weight – packing
14,2054 kg
Weight– Palett
232,9505 kg

Scope of supply

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2-3/8"
Flushing mechanism screw
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
Service opening cover is simply adjustable, screws 4 pcs
Production of this product was terminated