Product details

Technical parameters

Water connection from the back or top via mounting holesG1/2 "
Functional range of water pressure0,05 – 0,8 MPa
Recommended range of water pressure0,3 – 0,5 MPa
Big flush6 – 9 l
Small flush2,5 – 3,5 l
The default setting of large flush6 l
The default setting of small flush3 l
Hygienic reserve3 l
Water volume in the cistern9 l
Load test400 kg

    Application

  • For wall-hung WC
  • For the reconstruction of apartment units
  • For installation between two walls
  • For installation into wooden structures
  • For floor thickness 0–200 mm
  • For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

    Specifications

  • The load is transferred to the side walls, the strut is adjustable in the range 830–1200 mm
  • The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
  • The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
  • Dual flush independently adjustable with hygienic reserve
  • Suitable for installation of remote or sensor flushing
  • Compatible with all ALCA flush plates
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • Water supply from the rear/top
  • Maintenance work without using any tools
  • The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
  • Installation depth adjustable from 20–95 mm
  • Mounting depth 125 mm, with waste elbow 160 mm
  • Adjustable telescopic feet, range 0–200 mm
  • Frame material: powder-coated metal
  • Norms

    EN 14124, EN 14055
  • 39229000
Quantity (package) 1 pc
Quantity (pallet) 15 pcs
Dimensions (piece) 1195×530×145 mm
Dimensions (package) – mm
Weight (piece) 15,4051 kg
Weight (package) – kg
Weight (pallet) 253,8 kg

    Scope of supply

  • Cistern with fill and flush valve
  • Self–supporting frame with a crossbeam for anchoring between walls 830–1200 mm
  • Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
  • Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Elbow waste connector HT 90/90 polyethylene, PE-HD
  • Waste reduction HT 90/110 polyethylene, PE-HD
  • Inlet seal, PP outlet, wrapping seal
  • Drainage seal, PP connector, connector seal
  • End-caps set for protecting the connecting holes during installation of the system
  • Service opening cover is simply adjustable, screws 4 pcs
Online catalog Product codeEANTechnical sheet

Downloads

Product video