Pre-wall installation system for building into solid walls with top or front actuation

AM119/850 Renovmodul

Technical parameters

Water connection from the back or top via mounting holesG1/2 "
Functional range of water pressure0,05 – 1,6 MPa
Recommended range of water pressure0,3 – 0,5 MPa
Big flush6 – 9 l
Small flush2,5 – 3,5 l
Factory setting of large flush6 l
Factory setting of small flush3 l
Hygienic reserve3 l
Water volume in the cistern9 l
Load test400 kg

    Application

  • For wall-hung WC
  • For walling in and around the bearing wall – wet process
  • Suitable for reconstruction
  • For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

    Specifications

  • Dispenser for WC cistern tablets included
  • Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
  • Angle valve with the ability to connect to the Mepla piping system
  • This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
  • Galvanized support structure with four hinged brackets for easy installation
  • The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • Removable piece of polystyrene allows for easy access during installation
  • Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
  • Dual flush independently adjustable with hygienic reserve
  • Possibility of built-in remote flushing
  • Possibility of mounting in front of the wall
  • Compatible with all ALCA flush plates except for sensor flush plates,STRIPE and NIGHT LIGHT
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • Water supply from the rear/top
  • Maintenance work without using any tools
  • The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
  • Installation height 862 mm
  • Installation depth adjustable from 20–95 mm
  • Installation depth 170 mm
  • Material support brackets: galvanized metal
  • Norms

    EN 14124, EN 14055
Quantity (package) 1 pc
Quantity (pallet) 16 pcs
Dimensions (piece) 1040×465×180 mm
Dimensions (package) 1200×800×460 mm
Weight (piece) 10,5605 kg
Weight (package) 10,5605 kg
Weight (pallet) 188,968 kg

    Scope of supply

  • Cistern with fill and flush valve
  • Galvanized frame including supporting structure
  • Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
  • Fixation set: screw Ø8×60 dowel – 4 pcs, dowel Ø12 – 4 pcs, combi screw M10 – 2 pcs
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Elbow waste connector HT 90/110 polyethylene, PE-HD
  • Inlet seal, PP outlet, wrapping seal
  • Drainage seal, PP connector, connector seal
  • End-caps set for protecting the connecting holes during installation of the system
  • The 2 piece cover of the service opening is simply adjustable
  • Set for inserting toilet tablets
M0005-ND Water supply ring A100
M0017C-ND Inlet fill valve bracket (range AM)
M0021-ND Inlet sealing (WC modules)
M0023-ND Wrapping seal 45×58×25 (WC modules)
M0026-ND Waste sealing (WC modules)
M0028-ND Coupler sealing
M0043B-ND Inner board
M0046-ND Console pipe
M0080-ND Sleeve lid
M0243-ND Nut for angle valve bracket
M903-ND Threaded rods + accessories
M955-ND Set for changing mechanism screwes AM
M956-ND Sliding waste pipe holder
M959-ND Set for exchange of inlet fill valve and hose for WC module AM
MN0091-ND Frame sleeve
MN0092C-ND Frame for WC module sleeve (range AM)
MN0115-ND Pipe with O-ring for module range AM
MN0536-ND Service opening cover for AM118, AM119
MN0537A-ND AM118, AM119 – mechanism – new
P068-ND Angle valve with holder and nut, set
P165-ND Angle valve SCHELL with bracket and nut
Product codeEANTechnical sheet
AM119/8508595580563387Technický list
File Name Size Action
icon AM119/850 Renovmodul - CAD drawing.dwg 540.13 kB Download link icon
icon AM119/850 Renovmodul - CAD drawing.dxf 1.47 MB Download link icon
icon AM119/850 Renovmodul - Installation instructions.pdf 2.63 MB Download link icon
icon AM119/850 Renovmodul - Certificate.pdf 278.67 kB Download link icon
icon AM119/850 Renovmodul - Declaration of performance.pdf 215.76 kB Download link icon
icon AM119/850 Renovmodul - Service Instructions for Alca Concealed Cistern.pdf 8.65 MB Download link icon