Product details


  • For wall-hung WC
  • For installing in front of a support wall or into a plasterboard construction, installation depth is only 84 mm
  • For floor thickness 0–100 mm
  • For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm


  • The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
  • The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • Dual flush independently adjustable with hygienic reserve
  • Compatible with all our flush plates. except Alcaplast sensor flush plates
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • Water supply from the rear/top
  • Maintenance work without using any tools
  • The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
  • Installation depth adjustable from 20–60 mm
  • Installation depth 84 mm
  • Adjustable telescopic feet, range 0–100 mm
  • Frame material: powder-coated metal

Technical parameters

Water connection from the back or top via mounting holesG1/2 "
Functional range of water pressure0,05 – 1,6 MPa
Recommended range of water pressure0,3 – 0,5 MPa
The default setting of large flush6 l
The default setting of small flush3 l
Hygienic reserve3 l
Water volume in the cistern9 l
Load test400 kg
  • Norms

    EN 14124, EN 14055,
  • 39229000
Quantity (package) 1 pc
Quantity (pallet) 15 pcs
Dimensions (piece) 1210×140×590 mm
Dimensions (package) – mm
Weight (piece) 16,4911 kg
Weight (package) – kg
Weight (pallet) 263,3825 kg

    Scope of supply

  • Cistern with fill and flush valve
  • Self-supporting frame
  • Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
  • Fixation set: screw Ø8×60 – 8 pcs, dowel Ø12 – 8 pcs
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Waste elbow SLIM HT 90/90/110
  • Inlet seal, PP outlet, wrapping seal
  • Drainage seal, PP connector, connector seal
  • End-caps set for protecting the connecting holes during installation of the system
  • Service opening cover is simply adjustable, screws 4 pcs


Product codeEANTechnical


Product video