A108F/1500

Mounting frame with cistern for a waste sink with waste connection DN90/110 and faucet

Application

For mounting wall fittings
For a wall-hung waste sink with a spacing of anchor bolts up to 420 mm and waste connection Ø90/110
For mounting in front of a support wall or in to a plasterboard construction
Product codeEANTechnical
sheet
A108F/15008595580540517Technický list

Customs code

39229000

Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,6 MPa
Big flush
6 – 9 l
Small flush
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg

Specifications

For leading Wall Fittings
Built-in tanks allows for rinsing the waste sink
Height adjustable partitions
Swivel rail for attaching wall fittings with a pitch of 65-150 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition or in front of the bearing wall
The installed module is sealed with a plasterboard panel and there is no need for any additional fixing or anchor elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations
Dual flush, independently adjustable with hygienic reserve
Maintenance work without using any tools
Water supply from the rear / top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Adjustable telescopic feet, range 0 - 200 mm
Installation depth adjustable from 20-95 mm
Mounting depth 125 mm, with waste elbow 160 mm
Material: powder-coated metal