AM1115/1000 Renovmodul Slim

Pre-wall installation system for building into solid walls

Tento inovovaný předstěnový instalační systém ALCA s kódovým označením AM nahrazuje modelovou řadu A. Instalace těchto systému je nyní rychlejší a k jejich montáži vám nyní postačí pouze jeden klíč.

Application

For wall-hung WC
For walling in and around the bearing wall - wet process, installation depth only 86 mm
Suitable for reconstruction
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Tento inovovaný predstenový inštalačný systém ALCA s kódovým označením AM1115/1000 Renovmodul Slim nahrádza modelovú radu A1115B/1000 Renovmodul Slim. Inštalácia týchto systémov je teraz rýchlejšia a k ich montáži vám postačí iba jeden kľúč.

Product codeEANTechnical
sheet
AM1115/10008595580551292Technický list

Norms

EN 14124, EN 14055

Customs code

39229000

Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg

Specifications

Angle valve with the ability to connect to the Mepla piping system
Sliding rail holder for the waste connector can be set to eight positions between 0-93 mm
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Dual flush, independently adjustable with hygienic reserve
Compatible with all flush plates Alcaplast except for sensor flush plates
Maintenance work without using any tools
Water supply from the rear / top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting height 1070 mm
Installation depth adjustable from 20-60 mm
Installation depth 86 mm, with a 125 mm waste elbow
Material of the load bearing structure: galvanized metal