Shower drain configurator
Online catalog

  • {{ result.text }}

  • {{ result.text }}

APZ13-DOUBLE9 Fit and Go

Shower drain


For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For wheelchair access
Product codeEANTechnical
APZ13-DOUBLE9-5508595580571443Technický list
APZ13-DOUBLE9-6508595580571450Technický list
APZ13-DOUBLE9-7508595580562724Technický list
APZ13-DOUBLE9-8508595580562731Technický list
APZ13-DOUBLE9-9508595580562748Technický list


EN 1253

Customs code


Technical parameters

Odour trap
30 mm
Flow rate
50 l/min
Resistance of odour trap against the pressure
380 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
81 mm
Total installation height
96 – 150 mm
Load class K3
300 kg


Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Gradient of inner part of the shower drain body
Installation height 81 mm
Adjustable height
Self-adhesive tape for quality waterproofing
Shower drain made from one piece of stainless steel sheet
The shower drain body is protected by the polystyrene insert
Design is determined by double-sided grid DOUBLE - from one side it is a full grid made of stainless steel and the other side has an option for embedding tiles or waterproof wood to the thickness of 12 mm
25 years guarantee
Shower drain material: stainless steel 1.5 mm, AISI 304, DIN 1.4301

Logistic information

Quantity – packing
20 pcs
Quantity – Palett
60 pcs
Dimensions – piece
857×147×100 mm
Dimensions – packing
880×780×410 mm
3,1385 kg
Weight – packing
94,155 kg
Weight– Palett
– kg

Scope of supply

Linear shower drain
Two-sided grid DOUBLE (full grid or grid for embedding tiles)
Trap for shower drain APZ-S9
Combined odour trap SMART
Adjustable feet 4 pcs
Self-adhesive waterproofing tape
Protective foil covering for the drain edges and odour trap
Protective film for trap inlet
Installation trough cover - polystyrene
Comb for applying glue into the grid frame
Dismantling hook
Fixation set for attaching adjustable legs: screw 4.2×38 – 4 pcs, anchor – 4 pcs