.png)
APZ1001
Shower drain with an edge for perforated grids, straight outlet
Application
For indoor use
For wooden and prefabricated buildings
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For perforated stainless steel grids
For wheelchair access
Advantages:
High flow rate (up to 68 l / min)
100% easy clean trap
Low height installation
Complete technical and design solutions
Complete package including all accessories
25 year guarantee
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| APZ1001-300 | 8595580527235 |  | |
| APZ1001-550 | 8595580527242 | | |
| APZ1001-650 | 8595580527259 | | |
| APZ1001-750 | 8595580527266 | | |
| APZ1001-850 | 8595580527273 | | |
| APZ1001-950 | 8595580527280 | | |
| APZ1001-1050 | 8595580527297 | | |
| APZ1001-1150 | 8595580527303 | |
Downloads
Norms
17240, EN 1253Technical parameters
Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
590 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Load class K3
300 kg
Specifications
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 85 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
Trap material: polypropylene
Logistic information
Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×130×175 mm
Dimensions – packing
mm
Weight
1,9472 kg
Weight – packing
kg
Weight– Palett
kg
Scope of supply
The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs
