.png)
APZ11
Shower drain Antivandal with grid
Application
For indoor use
For public areas
For installation into open spaces or near the wall of the shower area
For drainage of floor-level showers
For wheelchair access
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| APZ11-300L | 8595580545420 |  | |
| APZ11-300M | 8595580545437 | | |
| APZ11-550L | 8595580529789 | | |
| APZ11-550M | 8595580529758 | | |
| APZ11-650L | 8595580529864 | | |
| APZ11-650M | 8595580529857 | | |
| APZ11-750L | 8595580529895 | | |
| APZ11-750M | 8595580529901 | | |
| APZ11-850L | 8595580529932 | | |
| APZ11-850M | 8595580529949 | | |
| APZ11-950L | 8595580529970 | | |
| APZ11-950M | 8595580529987 | | |
| APZ11-1050L | 8595580530013 | | |
| APZ11-1050M | 8595580530020 | | |
| APZ11-1150L | 8595580530068 | | |
| APZ11-1150M | 8595580530082 | |
Downloads
Norms
EN 1253Customs code
39229000Technical parameters
Odour trap
50 mm
Flow rate
60 – 68,8 l/min
Resistance of odour trap against the pressure
982 Pa
Waste pipe diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 158 mm
Load class K3
300 kg
Specifications
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Grid BUBLE is attached to the drain body using screws so that it can not be removed without special tools
Installation height from 85 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
Grid is included in packaging
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene
Logistic information
Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×175×130 mm
Dimensions – packing
mm
Weight
2,5452 kg
Weight – packing
kg
Weight– Palett
kg
Scope of supply
The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
Protective foil covering for the drain edges and odour trap
Protective film for trap inlet
Installation trough cover - polystyrene
Perforated stainless steel grid BUBLE
Related Products
Red code - the price can be found here: Spare parts catalogue
Grey marked parts - products available on our website