Product details
| Odour trap | 28 mm |
| Flow rate | 44 l/min |
| Resistance of odour trap against the pressure | 575 Pa |
| Waste pipe diameter | 40 mm |
| Minimum thickness of concrete | 55 mm |
| Total installation height | 70 – 96 mm |
| Movable flange range | 10 – 15 mm |
| Load class K3 | 300 kg |
- For indoor use
- For wooden and prefabricated buildings
- For drainage of floor-level showers
- For installation directly to the wall
- For perforated stainless steel grids
- For wheelchair access
- For sites with limited floor height
Application
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
- Adjustable vertical insulating collar for tiles with a thickness of 6–12 mm
- Installation height from 55 mm
- Adjustable height
- Trap firmly connected to the drain – 100% waterproofing
- Self-adhesive tape for quality waterproofing
- Mechanically cleanable trap up to the waste pipe
- The collar and trap are protected by foil, and the channel itself by a polystyrene insert
- The high flow rate is achieved due to the double compartment trap system
- Facilitates the inclination of the floor
- Better and safer transition of the insulation from the floor to the wall
- 25 years guarantee
- Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
- Trap material: polypropylene
Specifications
Norms
EN 1253
- 39229000
| Quantity (package) | 8 pcs |
| Quantity (pallet) | 24 pcs |
| Dimensions (piece) | 1120×160×205 mm |
| Weight (piece) | 5,0297 kg |
| Weight (package) | 39,9448 kg |
| Weight (pallet) | 139,8344 kg |
- The shower drain is assembled with the odour trap
- Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
- Self-adhesive waterproofing tape
- Protective foil covering for the drain edges and odour trap
- Protective film for trap inlet
- Installation trough cover - polystyrene
Scope of supply
Downloads
