Product details
- For indoor use
- For drainage of floor-level showers
- For installation into open spaces or near the wall of the shower area
- For perforated stainless steel grids
- For wheelchair access
Application
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
- Waterproofing drainage through the drainage holes in the drain body
- Installation height from 85 mm
- Adjustable height
- Trap firmly connected to the drain – 100% waterproofing
- Self-adhesive tape for quality waterproofing
- Mechanically cleanable trap up to the waste pipe
- The collar and trap are protected by foil, and the channel itself by a polystyrene insert
- The high flow rate is achieved due to the double compartment trap system
- Possibility to buy a combined odour trap
- 25 years guarantee
- Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
- Trap material: polypropylene
Specifications
| Odour trap | 50 mm |
| Flow rate | 60 l/min |
| Resistance of odour trap against the pressure | 982 Pa |
| Waste pipe diameter | 50 mm |
| Minimum thickness of concrete | 85 mm |
| Total installation height | 100 – 158 mm |
| Load class K3 | 300 kg |
Norms
EN 1253
- 39229000
| Quantity (package) | 12 pcs |
| Quantity (pallet) | 36 pcs |
| Dimensions (piece) | 820×135×170 mm |
| Dimensions (package) | 825×375×830 mm |
| Weight (piece) | 3,4189 kg |
| Weight (package) | 41,0268 kg |
| Weight (pallet) | 143,0804 kg |
- The shower drain is assembled with the odour trap
- Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
- Self-adhesive waterproofing tape
- The collar and the odour trap inlet are covered by the protective foil
- Installation channel cover
- Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs
Scope of supply
| Product code | EAN | Technical sheet |
|---|
Downloads
| APZ1S - CAD drawing.dwg | 202.69 kB | ||
| APZ1S - CAD drawing.dxf | 1.12 MB | ||
| APZ1S - Installation instructions.pdf | 1.17 MB |
