Shower drain configurator
5
Online catalog

  • {{ result.text }}

  • {{ result.text }}

APZ1

Shower drain with an edge for perforated grids

Application

    Application

  • For indoor use
  • For drainage of floor-level showers
  • For installation into open spaces or near the wall of the shower area
  • For perforated stainless steel grids
  • For wheelchair access

This drain is designed to take perforated grids. The stainless steel edge makes an elegant border between the tiles and the grid. Water flows into the drain both at the edges and through the perforations in the grid. It can therefore be positioned on the floor or near the wall of the shower area.

Product codeEANTechnical
sheet
APZ1-3008594045939194Technický list
APZ1-5508594045939200Technický list
APZ1-6508594045932928Technický list
APZ1-7508594045932935Technický list
APZ1-8508594045932942Technický list
APZ1-9508594045932959Technický list
APZ1-10508594045932966Technický list
APZ1-11508594045939897Technický list
APZ1-14508595580547110Technický list

Norms

EN 1253

Technical parameters

Technical parameters

Odour trap50 mm
Flow rate60 – 68,8 l/min
Resistance of odour trap against the pressure982 Pa
Waste pipe diameter50 mm
Minimum thickness of concrete85 mm
Total installation height100 – 158 mm
Load class K3300 kg

Specifications

    Specifications

  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Installation height from 85 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • Possibility to buy a combined odour trap
  • 25 years guarantee
  • Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
  • Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×130×175 mm
Dimensions – packing
mm
Weight
1,856 kg
Weight – packing
17,5932 kg
Weight– Palett
301,4912 kg

Scope of supply

  • The shower drain is assembled with the odour trap
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap
  • Protective film for trap inlet
  • Installation trough cover - polystyrene
  • Related Products