Product details

Technical parameters

Odour trap28 mm
Flow rate35 l/min
Resistance of odour trap against the pressure575 Pa
Waste pipe diameter40 mm
Minimum thickness of concrete55 mm
Total installation height70 – 96 mm
Load class K3300 kg


  • For indoor use
  • For drainage of floor-level showers
  • For installation into open spaces or near the wall of the shower area
  • For perforated stainless steel grids
  • For wheelchair access
  • For sites with limited floor height


  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Installation height from 55 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • 25 years guarantee
  • Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
  • Trap material: polypropylene
  • Norms

    EN 1253
  • 39229000
Quantity (package) 12 pcs
Quantity (pallet) 36 pcs
Dimensions (piece) 1120×135×170 mm
Weight (piece) 3,774 kg
Weight (package) 47,7132 kg
Weight (pallet) 163,1396 kg

    Scope of supply

  • The shower drain is assembled with the odour trap
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap
  • Protective film for trap inlet
  • Installation trough cover - polystyrene
Online catalog Product codeEANTechnical sheet
APZ101-3008595580510060Technický list
APZ101-5508595580504137Technický list
APZ101-6508595580504144Technický list
APZ101-7508595580504151Technický list
APZ101-8508595580504168Technický list
APZ101-9508595580504175Technický list
APZ101-10508595580504182Technický list
APZ101-11508595580504199Technický list
APZ101-14508595580550844Technický list