Shower drain configurator
0
Online catalog

  • {{ result.text }}

  • {{ result.text }}

APZ115 Marble Low

Shower drain without edge with grid for embedding tiles

news

Application

For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For use of various types of floor coverings
For wheelchair access
For sites with limited floor height
Product codeEANTechnical
sheet
APZ115-3008595580565442Technický list
APZ115-5508595580565459Technický list
APZ115-6508595580565466Technický list
APZ115-7508595580565473Technický list
APZ115-8508595580565480Technický list
APZ115-9508595580565497Technický list
APZ115-10508595580565428Technický list
APZ115-11508595580565435Technický list

Norms

EN 1253

Customs code

39229000

Technical parameters

Odour trap
28 mm
Flow rate
35 l/min
Resistance of odour trap against the pressure
575 Pa
Waste pipe diameter
40 mm
Minimum thickness of concrete
70 mm
Total installation height
70 – 97 mm
Load class K3
300 kg

Specifications

Elegant design thanks to the grid for embedding tiles without a stainless steel frame
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 70 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×185×160 mm
Dimensions – packing
590×430×390 mm
Weight
2,4806 kg
Weight – packing
22,3254 kg
Weight– Palett
357,2064 kg

Scope of supply

The shower drain is assembled with the odour trap
Grid for gluing various types of floor coverings
Template for cutting tiles on the grid
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
Protective foil covering for the drain edges and odour trap
Protective film for trap inlet
Installation trough cover - polystyrene
Dismantling hook