.png)
APZ12 Optimal
Shower drain with an edge for perforated grids or tile embedding
Application
- For indoor use
- For drainage of floor-level showers
- For installation into open spaces or near the wall of the shower area
- For wheelchair access
- For perforated grids
- For grid TILE for embedding tiles
- For full grid SOLID
Application
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| APZ12-750 | 8595580541033 |  | |
| APZ12-850 | 8595580541040 | | |
| APZ12-950 | 8595580541057 | | |
| APZ12-1050 | 8595580541064 | |
Downloads
Norms
EN 1253Technical parameters
| Odor trap combined with a water seal | 50 mm |
| Flow of the inlet grid | 63 l/min |
| Resistance of odour trap against the pressure | 710 Pa |
| Waste outlet diameter | 50 mm |
| Minimum thickness of concrete | 85 mm |
| Total installation height | 100 – 127 mm |
| Load class K3 | 300 kg |
Specifications
- Installation height from 85 mm
- Adjustable plastic anchor legs 0–27 mm allowing fast and convenient installation, including the precise setting of the required level
- High resistance against chemicals
- Secure connection to the construction waterproofing system
- Combined odour trap provides protection against odour from the sewage even after the water dries out from the waste
- Mechanically cleanable trap up to the waste pipe
- The high flow rate is achieved due to the double compartment trap system
- Self-adhesive tape for quality waterproofing
- Material: polypropylene filled with talc resistant to mechanical, chemical and thermal damage
Specifications
Logistic information
Quantity – packing
12 pcs
Quantity – Palett
36 pcs
Dimensions – piece
1120×125×150 mm
Dimensions – packing
825×375×1130 mm
Weight
1,7304 kg
Weight – packing
19,65 kg
Weight– Palett
79,04 kg
