Shower drain configurator
Online catalog

  • {{ result.text }}

  • {{ result.text }}


Shower drain with a stainless steel edge for perforated grids or tile embedding


For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For wheelchair access
For perforated grids
For grid TILE for embedding tiles
For full grid SOLID
Product codeEANTechnical
APZ22-7508595580554620Technický list
APZ22-8508595580554637Technický list
APZ22-9508595580554644Technický list


EN 1253

Technical parameters

Odor trap combined with a water seal
50 mm
Flow of the inlet grid
63 l/min
Resistance of odour trap against the pressure
710 Pa
Waste outlet diameter
50 mm
Minimum thickness of concrete
85 mm
Total installation height
100 – 127 mm
Load class K3
300 kg


Plastic shower drain with stainless steel edge, which is tightly fixed around the circuit
Installation height from 85 mm
Adjustable plastic anchor legs 0–27 mm allowing fast and convenient installation, including the precise setting of the required level
High resistance against chemicals
Secure connection to the construction waterproofing system
Combined odour trap provides protection against odour from the sewage even after the water dries out from the waste
Mechanically cleanable trap up to the waste pipe
The high flow rate is achieved due to the double compartment trap system
Self-adhesive tape for quality waterproofing
Material: polypropylene filled with talc resistant to mechanical, chemical and thermal damage

Logistic information

Quantity – packing
12 pcs
Quantity – Palett
36 pcs
Dimensions – piece
820×125×150 mm
Dimensions – packing
825×375×830 mm
1,4982 kg
Weight – packing
17,9784 kg
Weight– Palett
73,9352 kg

Scope of supply

Linear shower drain
Fixation set: screw Ø4.2×38 – 8 pcs, dowel Ø8 – 8 pcs
Self-adhesive waterproofing tape
Fixing hardware for anchoring the adjustable legs: screw 4.2×9.5 – 8 pcs
Combined odour trap with an integrated seal
Height adjustable feet 4 pcs

Related Products