APV3344

Floor drain 105×105/50/75 mm side outlet, stainless steel grid, stainless steel flange and collar-2nd level insulation, wet and dry odour trap

Application

For the interior, where will be frequent use associated with the regular water runoff into the floor drain (bathrooms) - wet odour trap
For outdoor spaces where there may be a drop in temperature below freezing - dry odour trap
For drainage of floor level showers
For wheelchair access
Product codeEANTechnical
sheet
APV33448595580518516Technický list

Norms

EN 1253

Customs code

39269097

Technical parameters

The flow of the inlet grid (wet odour trap)
46 l/min
The flow of the inlet grid (dry odour trap)
62 l/min
Wet odour trap
51 mm
Resistance of odour trap against the pressure
480 Pa
Load class K3
300 kg
Waste pipe diameter
75/50 mm
Total installation height
104 – 174 mm

Specifications

Height adjustable throat 25-95 mm
Wide insulation collar for connection to waterproofing construction
Collar-2nd level of insulation for connecting to waterproofing layer beneath the pavement
Stainless steel collar for firm attachment of waterproofing membrane or building waterproofing fabric
Side connection to waste Ø75 / 50 mm
Mechanically cleanable trap up to the waste pipe
Optional use dry or wet odour traps
Odour traps prevent the penetration of odours from the sewer
Compatibility with floor drains parts including wet, dry and combined odour trap SMART
Material: polypropylene resistant to mechanical, chemical and thermal damage

Logistic information

Quantity – packing
8 pcs
Quantity – Palett
128 pcs
Dimensions – piece
355×135×235 mm
Dimensions – packing
560×380×475 mm
Weight
1,2288 kg
Weight – packing
9,9616 kg
Weight– Palett
179,3856 kg

Scope of supply

Drain body Ø50/75 mm, side outlet
Stainless steel grid
Wet odour trap
Dry odour trap
Stainless steel flange + assembly set
Collar-2nd level of insulation inner Ø105 mm
Seal kit