A101/1200E Sádromodul

Pre-wall installation system ECOLOGY for dry build up (plasterboard)


For wall-hung WC with flushing volume of 2/4 l
For mounting in front of a support wall or in to a plasterboard construction
For floor thickness 0-200 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm


EN 14124, EN 14055

Customs code


Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
3,5 – 6 l
Small flush
2 – 4 l
The default setting of large flush
4 l
The default setting of small flush
2 l
Hygienic reserve
2 l
Water volume in the cistern
6 l
Load test
400 kg


The frame allows the anchoring to a separate sufficiently strong plasterboard partition or in front of the bearing wall
The installed module is sealed with a plasterboard panel and there is no need for any additional fixing or anchor elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush, independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear / top
Water-saving flushing - 2 l small flush, 4 l large flush
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Adjustable telescopic feet, range 0 - 200 mm
Installation depth adjustable from 20-95 mm
Mounting depth 125 mm, with waste elbow 160 mm
Frame material: powder-coated metal
Production of this product was terminated