Product details

Technical parameters

Water connection from the back or top via mounting holesG1/2 "
Functional range of water pressure0,05 – 0,8 MPa
Recommended range of water pressure0,3 – 0,6 MPa
Big flush6 – 9 l
Small flush2,5 – 3,5 l
The default setting of large flush6 l
The default setting of small flush3 l
Hygienic reserve3 l
Water volume in the cistern9 l
Load test400 kg

    Application

  • For mounting wall fittings
  • For a wall-hung waste sink with a spacing of anchor bolts up to 420 mm and waste connection Ø90/110
  • For mounting in front of a support wall or in to a plasterboard construction

    Specifications

  • For leading Wall Fittings
  • Built-in tanks allows for rinsing the waste sink
  • Height adjustable partitions
  • Swivel rail for attaching wall fittings with a pitch of 65–150 mm
  • Angle valve with the ability to connect to the Mepla piping system
  • The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
  • The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
  • The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
  • Dual flush independently adjustable with hygienic reserve
  • Maintenance work without using any tools
  • Water supply from the rear/top
  • The cistern is made of one piece, thus ensuring 100% impermeability
  • The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
  • Adjustable telescopic feet, range 0–200 mm
  • Installation depth adjustable from 20–95 mm
  • Mounting depth 125 mm, with waste elbow 160 mm
  • Material: powder-coated metal
  • 39229000
Quantity (package) 1 pc
Quantity (pallet) 15 pcs
Dimensions (piece) 1195×145×530 mm
Dimensions (package) 1195×530×145 mm
Weight (piece) 15,8606 kg
Weight (pallet) 253,688 kg

    Scope of supply

  • Cistern with fill and flush valve
  • Self-supporting frame
  • Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
  • Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
  • Connection fittings G1/2"–G1/2"
  • Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
  • Waste elbow HT 90/110 with a seal
  • Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
  • Inlet seal, PP outlet, wrapping seal
  • Drainage seal, PP connector, connector seal
  • The 2 piece cover of the service opening is simply adjustable
Online catalog Product codeEANTechnical sheet
A108F/11008595580542139Technický list

Downloads