AM116/1300H Solomodul

Pre-wall installation system for dry build up (self-supporting) – for people with reduced mobility

Application

For wall-hung WC
For open spaces - does not need any supporting structure
For persons with reduced mobility with the recommended use of remote or sensor flushing
To mount supporting handrails
For floor thickness 0-200 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Product codeEANTechnical
sheet
AM116/1300H8595580550585Technický list

Norms

EN 14124, EN 14055

Customs code

39229000

Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
6 – 9 l
Small flush
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg

Specifications

Adjustable anchor feet and a spring-lock system, with a range of 0-200 mm
Visible marks for both leveling and the centerline
Sliding rail holder for the waste connector can be set to eight positions between 0-93 mm
Angle valve with the ability to connect to the Mepla piping system
Frame for wall-hung WC in an open space area and boards for the installation of handrails for the disabled
A frame module for building into plasterboard constructions
The installed module is sealed with a plasterboard panel and there is no need for any additional fixing or anchor elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear / top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting depth adjustable from 20–95 mm
Installation depth 200 mm
Frame material: powder-coated metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
5 pcs
Dimensions – piece
1010×1285×210 mm
Dimensions – packing
1010×210×1285 mm
Weight
46,0403 kg
Weight – packing
46,0403 kg
Weight– Palett
250,2015 kg

Scope of supply

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2-3/8"
Flushing mechanism screw 2 pcs
Fixation set: screw Ø8x60 - 16 pieces, dowel Ø 12 - 16 pieces
Fixation material for fixing the WC pan: Threaded rod M12 - 2 pcs, washers - 4 pcs , cover - 2 pcs, nut - 2 pcs, thread protector - 2 pcs
Elbow waste connector HT90 / 110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Boards for installing handrails for the disabled