.png)
AM1101/1200 Sádromodul Slim
Pre-wall installation system for dry build up (plasterboard)
Application
For wall-hung WC
For installing in front of a support wall or into a plasterboard construction, installation depth is only 84 mm
For floor thickness 0–100 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| AM1101/1200 | 8595580551384 |  |
Downloads
Norms
EN 14124, EN 14055Customs code
39229000Technical parameters
Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 1,6 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg
Specifications
Visible marks for both leveling and the centerline
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Dual flush independently adjustable with hygienic reserve
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation depth adjustable from 20–60 mm
Installation depth 84 mm
Adjustable telescopic feet, range 0–100 mm
Frame material: powder-coated metal
Logistic information
Quantity – packing
1 pcs
Quantity – Palett
15 pcs
Dimensions – piece
1210×140×590 mm
Dimensions – packing
1210×590×140 mm
Weight
16,4478 kg
Weight – packing
16,4478 kg
Weight– Palett
266,7170 kg
Scope of supply
Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Fixation set: screw Ø8×60 – 8 pcs, dowel Ø12 – 8 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Waste elbow SLIM HT 90/90/110
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Red code - the price can be found here: Spare parts catalogue
Grey marked parts - products available on our website