.png)
AM116/1120 Solomodul
Pre-wall installation system for dry build up (self-supporting)
Application
For wall-hung WC
For mounting in front of a support wall or in to a plasterboard construction
For floor thickness 0–150 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| AM116/1120 | 8595580550516 |  |
Downloads
Norms
EN 14124, EN 14055Customs code
39229000Technical parameters
Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
6 – 9 l
Small flush
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg
Specifications
Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
Visible marks for both leveling and the centerline
Sliding rail holder for the waste connector can be set to eight positions between 0–45 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation depth adjustable from 20–95 mm
Installation depth 200 mm
Frame material: powder-coated metal
Logistic information
Quantity – packing
1 pcs
Quantity – Palett
12 pcs
Dimensions – piece
1195×220×525 mm
Dimensions – packing
1195×525×220 mm
Weight
20,5019 kg
Weight – packing
20,5019 kg
Weight– Palett
266,0228 kg
Scope of supply
Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Flushing mechanism screw 2 pcs
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Red code - the price can be found here: Spare parts catalogue
Grey marked parts - products available on our website