.png)
AM119/850 Renovmodul
Pre-wall installation system for building into solid walls with top or front actuation
Application
For wall-hung WC
For walling in and around the bearing wall – wet process
Suitable for reconstruction
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| AM119/850 | 8595580563387 |  |
Downloads
Norms
EN 14124, EN 14055Customs code
39229000Technical parameters
Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 1,6 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
6 – 9 l
Small flush
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg
Specifications
Dispenser for WC cistern tablets included
Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
Angle valve with the ability to connect to the Mepla piping system
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
Galvanized support structure with four hinged brackets for easy installation
The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Removable piece of polystyrene allows for easy access during installation
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Possibility of built-in remote flushing
Compatible with all flush plates Alcaplast except sensor flush plates and NIGHT LIGHT
The cistern is made of one piece, thus ensuring 100% impermeability
Water supply from the rear/top
Maintenance work without using any tools
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation height 862 mm
Installation depth adjustable from 20–95 mm
Installation depth 170 mm
Material support brackets: galvanized metal
Logistic information
Quantity – packing
1 pcs
Quantity – Palett
16 pcs
Dimensions – piece
1040×465×180 mm
Dimensions – packing
1200×800×460 mm
Weight
9,0889 kg
Weight – packing
9,0889 kg
Weight– Palett
168,9680 kg
Scope of supply
Cistern with fill and flush valve
Galvanized frame including supporting structure
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Set for inserting toilet tablets
Red code - the price can be found here: Spare parts catalogue
Grey marked parts - products available on our website