AM1115/1000 Renovmodul Slim

Pre-wall installation system for building into solid walls

Application

For wall-hung WC
For walling in and around the bearing wall - wet process, installation depth only 86 mm
Suitable for reconstruction
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Product codeEANTechnical
sheet
AM1115/10008595580551292Technický list

Norms

EN 14124, EN 14055

Customs code

39229000

Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg

Specifications

Sliding rail holder for the waste connector can be set to eight positions between 0-93 mm
Angle valve with the ability to connect to the Mepla piping system
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
Galvanized support structure with four hinged brackets for easy installation
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Dual flush independently adjustable with hygienic reserve
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear / top
Removable piece of polystyrene allows for easy access during installation
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting height 1070 mm
Mounting depth adjustable from 20–60 mm
Installation depth 86 mm, with a 125 mm waste elbow
Material of the load bearing structure: galvanized metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
20 pcs
Dimensions – piece
1086×528×145 mm
Dimensions – packing
1080×522×140 mm
Weight
9,8337 kg
Weight – packing
9,8337 kg
Weight– Palett
216,674 kg

Scope of supply

Cistern with fill and flush valve
Galvanized frame including supporting structure
Fittings 1/2" water connection with the integrated angle valve Schell 1/2-3/8"
Flushing mechanism screw 2 pcs
Waste elbow HT 90/110 polypropylene
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable