A115/1000V Renovmodul

Pre-wall installation system with ventilation for building into solid walls

Application

For wall-hung WC
For walling in and around the bearing wall – wet process
Suitable for reconstruction
Preparation for the connection to the ventilation system
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Product codeEANTechnical
sheet
A115/1000V8595580536169Technický list

Norms

EN 14124, EN 14055,

Customs code

39229000

Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
6 – 9 l
Reduced flushing
2,5 – 3,5 l
The default setting of large flush
6 l
The default setting of small flush
3 l
Hygienic reserve
3 l
Water volume in the cistern
9 l
Load test
400 kg

Specifications

Odour removal directly from the WC bowl
Can be connected to a extraction fan (not included)
Recommended extraction fan flow rate 30m³/h, pressure 60 Pa and a return valve, the fan must be positioned at least at a height of 1.2 m above the floor
This technical solution allows anchoring to an uneven surface of the back wall where a cut out was made, in the range of 50 mm
Galvanized support structure with four hinged brackets for easy installation
The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Removable piece of polystyrene allows for easy access during installation
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
The elbow bend comes fitted with an end-plug
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
The cistern is made of one piece, thus ensuring 100% impermeability
Water supply from the rear/top
Maintenance work without using any tools
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting height 1062 mm
Installation depth adjustable from 20–95 mm
Installation depth 125 mm
Material of the load bearing structure: galvanized metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
20 pcs
Dimensions – piece
1050×140×480 mm
Dimensions – packing
1050×480×140 mm
Weight
9,9552 kg
Weight – packing
10,051 kg
Weight– Palett
221,12 kg

Scope of supply

Cistern with fill and flush valve
Galvanized frame including supporting structure
Removable piece of polystyrene allows for easy access during installation
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Flushing mechanism screw 2 pcs
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
Service opening cover is simply adjustable, screws 4 pcs
Elbow HT for connection to the ventilation system
Plug for plugging the exhaust outlet if not used
Production of this product was terminated