Shower drain configurator
Online catalog

  • {{ result.text }}

  • {{ result.text }}

A100/1000E Alcamodul

Pre-wall installation system ECOLOGY for building into solid walls



For wall-hung WC with flushing volume of 2/4 l
For walling in and around the bearing wall – wet process
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm


EN 14124, EN 14055

Customs code


Technical parameters

Water connection from the back or top via mounting holes
G1/2 "
Functional range of water pressure
0,05 – 0,8 MPa
Recommended range of water pressure
0,3 – 0,5 MPa
Big flush
3,5 – 6 l
Small flush
2 – 4 l
The default setting of large flush
4 l
The default setting of small flush
2 l
Hygienic reserve
2 l
Water volume in the cistern
9 l
Load test
400 kg


Mounting bracket ensures high rigidity of the toilet connection to the wall
Dimensions and construction of the console simplify installation
The construction of the polystyrene insulation simplifies the process of walling-in, prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Dual flush independently adjustable with hygienic reserve
Water-saving flushING: 2 l small flush, 4 l large flush
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
The cistern is made of one piece, thus ensuring 100% impermeability
Water supply from the rear/top
Maintenance work without using any tools
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Mounting height 1062 mm
Installation depth adjustable from 20–95 mm
Installation depth 125 mm
Necessary to wall under or use supporting feet M90
Material of the support brackets: powder-coated metal

Logistic information

Quantity – packing
1 pcs
Quantity – Palett
20 pcs
Dimensions – piece
1050×480×140 mm
Dimensions – packing
– mm
7,4607 kg
Weight – packing
– kg
Weight– Palett
170 kg

Scope of supply

Tank with inlet and Ecology outlet valve
Mounting bracket
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Fixation set: screw Ø8×60 – 2 pcs, screw Ø4,8×38 – 2 pcs, dowel Ø12 – 2 pcs, dowel Ø8 – 2 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
Service opening cover is simply adjustable, screws 4 pcs
Telescopic mounting brackets 2 pcs
Production of this product was terminated