.png)
APZ115 Marble Low
Shower drain without edge with grid for embedding tiles
Application
For indoor use
For drainage of floor-level showers
For installation into open spaces or near the wall of the shower area
For wheelchair access
For sites with limited floor height
| Product code | EAN | Technical sheet | |
|---|---|---|---|
| APZ115-300 | 8595580565442 |  | |
| APZ115-550 | 8595580565459 | | |
| APZ115-650 | 8595580565466 | | |
| APZ115-750 | 8595580565473 | | |
| APZ115-850 | 8595580565480 | | |
| APZ115-950 | 8595580565497 | | |
| APZ115-1050 | 8595580565428 | | |
| APZ115-1150 | 8595580565435 | |
Downloads
Norms
EN 1253Customs code
39229000Technical parameters
Odour trap
28 mm
Flow rate
35 l/min
Resistance of odour trap against the pressure
575 Pa
Waste pipe diameter
40 mm
Minimum thickness of concrete
100 mm
Total installation height
70 – 97 mm
Load class K3
300 kg
Specifications
Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation height from 70 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to buy a combined odour trap
25 years guarantee
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Trap material: polypropylene
Logistic information
Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×185×160 mm
Dimensions – packing
590×430×390 mm
Weight
2,4806 kg
Weight – packing
22,3254 kg
Weight– Palett
357,2064 kg
Scope of supply
The shower drain is assembled with the odour trap
Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs
Dismantling hook
