Shower drain configurator
1
Online catalog

  • {{ result.text }}

  • {{ result.text }}

APZ111 Low

Shower drain Antivandal with grid

Application

    Application

  • For indoor use
  • For public areas
  • For installation into open spaces or near the wall of the shower area
  • For drainage of floor-level showers
  • For wheelchair access
  • For sites with limited floor height
Product codeEANTechnical
sheet
APZ111-300L8595580545574Technický list
APZ111-300M8595580545581Technický list
APZ111-550L8595580529826Technický list
APZ111-550M8595580529819Technický list
APZ111-650L8595580530105Technický list
APZ111-650M8595580530112Technický list
APZ111-750L8595580530143Technický list
APZ111-750M8595580530150Technický list
APZ111-850L8595580530181Technický list
APZ111-850M8595580530198Technický list
APZ111-950L8595580530228Technický list
APZ111-950M8595580530235Technický list
APZ111-1050L8595580530266Technický list
APZ111-1050M8595580530273Technický list
APZ111-1150L8595580530303Technický list
APZ111-1150M8595580530310Technický list

Norms

EN 1253

Customs code

39229000

Technical parameters

Technical parameters

Odour trap28 mm
Flow rate35 l/min
Resistance of odour trap against the pressure575 Pa
Waste pipe diameter40 mm
Minimum thickness of concrete55 mm
Total installation height70 – 96 mm
Load class K3300 kg

Specifications

    Specifications

  • Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
  • Grid BUBLE is attached to the drain body using screws so that it can not be removed without special tools
  • Installation height from 55 mm
  • Adjustable height
  • Trap firmly connected to the drain – 100% waterproofing
  • Self-adhesive tape for quality waterproofing
  • Mechanically cleanable trap up to the waste pipe
  • The collar and trap are protected by foil, and the channel itself by a polystyrene insert
  • The high flow rate is achieved due to the double compartment trap system
  • Grid is included in packaging
  • 25 years guarantee
  • Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
  • Trap material: polypropylene

Logistic information

Quantity – packing
9 pcs
Quantity – Palett
144 pcs
Dimensions – piece
385×175×130 mm
Dimensions – packing
mm
Weight
2,4199 kg
Weight – packing
kg
Weight– Palett
kg

Scope of supply

  • The shower drain is assembled with the odour trap
  • Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
  • Self-adhesive waterproofing tape
  • Protective foil covering for the drain edges and odour trap
  • Protective film for trap inlet
  • Installation trough cover - polystyrene
  • Perforated stainless steel grid BUBLE